Lightning current arresters
FX-090 F75 T
FX-230 F75 T
Lightning current arrester for coaxial line
F connectors
Designed to protect coaxial lines. It is installed at the boundary of LPZ 0A and LPZ 1 zones at the line entry into
the building. It is suitable as the 1st level of surge protection in coordination with the SX type.
Including:
– universal plastic adapter for DIN rail assembling,
– adapter GND 2.
| Technical data | FX-090 F75 T F/F | FX-230 F75 T F/F |
| Location SPD | ST 1 | ST 1 |
| Maximum operating voltage Uc | 70 V DC | 70 V DC |
| Nominal current IL | 4 A | 4 A |
| D1 lightning impulse current (10/350 μs) line – SH Iimp | 2,5 kA | 2,5 kA |
| D1 lightning impulse current (10/350 μs) SH – PE Iimp | 2,5 kA | 2,5 kA |
| C2 nominal discharge current (8/20 μs) line – SH In | 10 kA | 10 kA |
| C2 nominal discharge current (8/20 μs) SH – PE In 10 kA 10 kA
| 10 kA | 10 kA |
| voltage protection level line – SH at 1 kV/μs C3 Up | 600 V | 600 V |
| voltage protection level SH – PE at 1 kV/μs C3 Up | 600 V | 600 V |
| Wave impedance Z | 75 Ω | 75 Ω |
| Insertion attenuation | < 0,2 dB | < 0,2 dB |
| SWR | < 1,3 | < 1,3 |
| Bandwidth f | 0 – 2,15 GHz | 0 – 2,15 GHz |
| Response time line – SH ta | 100 ns | 100 ns |
| Response time SH – PE ta | 100 ns | 100 ns |
| Degree of protection | IP 20 | IP 20 |
| Range of operating temperatures | – 40 °C … + 80 °C | – 40 °C … + 80 °C |
| Connection input – output | F 75 | F 75 |
| Meets the requirements of standard | EN 61643-21 | EN 61643-21 |
| Ordering number | 8595090533870 | 8595090533924 |
|
 |
SABO SYSTEMS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |
