| Home | » Products | » Telecom, Data and Signal Surge Protection Devices | » Surge arrester for Ethernet Cat. 5 or Cat. 5e into 19“ racks |
Surge Arresters
DL-Cat. 5e RACK PANEL
Surge arrester for Ethernet Cat. 5 or Cat. 5e into 19“ racks
Fine surge protection designed to protect up to 24 ports of Ethernet CAT5. Only a shielded version
is supplied. It is installed at the boundary of LPZ 2 and LPZ 3 zones, directly before the equipment.
| Technical data | RACK PANEL |
| Location SPD | ST 3 |
| Maximum operating voltage Uc | 8,1 V DC / 5,7 V AC |
| Nominal current IL | 100 mA |
| C2 total nominal discharge current (8/20 μs) line - PE In | 1,6 kA |
| C1 nominal discharge current per line In | 200 A |
| C1 voltage protection level line - line at In UP | 40 V |
| C2 voltage protection level line - PE at In Up | 350 V |
| C3 voltage protection level line - line at 1 kV/μs Up | 65 V |
| C3 voltage protection level line - PE at 1 kV/μs Up | 350 V |
| Insertion attenuation at 100 MHz | 1,5 dB |
| Response time line - line ta | 1 ns |
| Response time line - PE ta | 100 ns |
| Degree of protection | IP 20 |
| Range of operating temperatures | – 40 °C … + 60 °C |
| Connection input – output | RJ 45/RJ 45 |
| Mounting on | 19” rack |
| Meets the requirements of standard | EN 61643-21 |
| Ordering number DL-Cat. 5e 8 RACK panel DL-Cat. 5e 16 RACK panel DL-Cat. 5e 24 RACK panel | 8595090529309 8595090529316 8595090529323 |
|
 |
SABO SYSTEMS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |
