Surge Arresters
DL-1G
DL-1G 60 V
Surge arrester for Ethernet Cat. 6
Combination of coarse and fine surge arresters designed to protect all 4 pairs of a shielded patch cord. Its intended for protection of connecting switches and/or communication cards of Ethernet Category 6 or 5e (up to 1 Gbps). Product is fully shielded. Installation at the boundary of LPZ 2LPZ 3 zones and higher, directly close to the equipment.
Including:
universal plastic adapter for DIN rail assembling,
adapter GND 2.
Technical data | DL-1G | DL-1G 60 V |
Location SPD | ST 2+3 | ST 2+3 |
Maximum operating voltage Uc | 48 V DC / 34 V AC | 60 V DC |
Nominal current IL | 100 mA | 500 mA |
C2 nominal discharge current line - line In | 150 A | 150 A |
C2 total nominal discharge current (8/20 s) line - PE In | 2,5 kA | 2,5 KA |
C2 voltage protection level line - line at In UP | 110 V | 110 V |
C2 voltage protection level line - PE at In Up | 400 V | 400 V |
C3 voltage protection level line - line at 1 kV/s Up | 155 V | 155 V |
C3 voltage protection level line - PE at 1 kV/s Up | 400 V | 400 V |
Insertion attenuation at 250 MHz | 1,5 dB | 1,5 dB |
Response time line - line ta | 1 ns | 1 ns |
Response time line - PE ta | 100 ns | 100 ns |
Degree of protection | IP 20 | IP 20 |
Range of operating temperatures | 40 C + 60 C | 40 C + 60 C |
Connection input output | patch cord RJ 45 patch cord RJ 45 | patch cord RJ 45 patch cord RJ 45 |
Mounting on | surface on the desk/DIN rail 35 mm | surface on the desk/DIN rail 35 mm |
Meets the requirements of standard | EN 61643-21 | EN 61643-21 |
Ordering number | 8595090532569 | 8595090528876 |
![]() |
SABO SYSTEMS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |